Joined: 26 Aug 2016
|Posted: Fri Aug 26, 2016 8:32 am Post subject: USB Redirector autoconnect not working as expected
|We are encountering a strange issue as described below:
1. Two MODEM devices are connected to USB ports 1-1-1-2 and 1-1-4-2
2. Setup auto-connect to USB port 1-1-1-2 using the below command
usbrdrltsh.exe -autoconnect on -server SERVER1:32032 -vid 8087 -usbport 1-1-1-2
3. Power on (or plug-in) the MODEM in port 1-1-1-2. It all works good.
4. Power off (plug-out) the MODEM, and turn on the one connected in 1-1-4-2. The client still auto-connects to this device which is not asked for auto-connect.
Even in the server, if I assign the different names to each device, I see that same name is appearing. Somewhere the usbport match seem to be missing in your rules.
Can you help resolving this issue?
I have already sent a mail to 'firstname.lastname@example.org', but no responses received yet