USB Redirector v5.2, USB Redirector RDP Edition v2.2 and USB Redirector TS Edition v1.2 have been released.

• Fixed issue with newer iPhones and iPods not updating firmware from iTunes.
• Fixed issue with device's auto-connect settings being lost after resume from Hibernate or Standby.

• USB Redirector v5.2 is backward compatible with previous v5.x releases.
• USB Redirector RDP Edition v2.2 is backward compatible with previous v2.x releases.
• USB Redirector TS Edition v1.2 is backward compatible with previous v1.x releases.

USB Redirector v5.1 and USB Redirector RDP Edition v2.1 have been released.

• Workaround for USB Mass Storage devices which can not handle increased latency when working over network.
• Console command-line utility is now included with USB Redirector.

• Fixed issue with Android devices not correctly detected by ADB.
• Fixed issue with -usbport parameter in command line.
• Fixed BSOD on USB server side when device is unplugged.

• USB Redirector v5.1 is backward compatible with v5.0.
• USB Redirector RDP Edition v2.1 is backward compatible with v2.0.

USB Redirector TS Edition v1.1 has been released.

• CTS LS100 Check Scanner support has been added.
• Hitachi USB Finger Vein Biometric Scanner support has been added.
• ICAR Vision Systems IDBox support has been added.

• Workaround for USB Mass Storage devices which can not handle increased latency when working over network.
• Console command-line utility is now included with USB Redirector.

• Fixed issue with Android devices not correctly detected by ADB.
• Fixed issue with -usbport parameter in command line.
• Fixed BSOD on USB server side when device is unplugged.

• USB Redirector TS Edition v1.1 is backward compatible with v1.0.

USB Redirector for Linux v2.4 has been released.

• Nicknames are now supported!
• Added support for Linux systems with 64-bit kernel and 32-bit usermode.
• Added support for devices with vid=ffff and/or pid=ffff.
• Workaround for USB Mass Storage devices which can not handle increased latency when working over network.

• Fixed 'Segmentation fault' error when starting daemon on some ARM systems.
• Fixed improper driver compilation on RedHat 6 systems.
• USB Server: fixed DMA issue on some ARM systems that caused a device to stop working.
• USB Client: fixed system hang during heavy activity of local and redirected USB devices at the same time.
• USB Client: minor fixes in usbclnt utility.

USB Redirector for Linux v2.2 has been released.

• Support for rdesktop 1.7.0.

• USB Client: fixed 'parent hub has no TT' error when connecting remote device.
• USB Client: fixed minor bug in usbclnt utility when displaying a USB device with empty name.

USB Redirector for Linux v2.1.1 has been released.

• Support for kernel module compilation on kernels 2.6.36 and newer. Please note that this is not an official support of these kernels.

Today we are happy to announce a set of major releases of our USB Redirector product line. It now includes a new product USB Redirector TS Edition with some unique features, as well as all-new USB Redirector for Linux (former USB Server). Much work has been done to make these quality products available for our users. Hope they would be useful for you. Feel free to try!

Please note that old license keys are not valid for these versions. If you already own a license for one of these products, please contact us for an update.

USB Redirector v5.0 has been released.

• Added support of new USB device types
• Data compression
• Device reset on disconnect

• A number of minor bugs fixed
• Fixed safe removal issue on USB client side in Windows 7
• Fixed issue with device sharing on system boot
• Fixed issue with ActiveSync not detecting PDAs in Windows 7
• Fixed issue with Blackberry not detected in Windows 7
• Fixed Code 10 error in Device Manager for some devices on USB client

USB Redirector TS Edition v1.0 has been released.

This is a new product which allows redirection of USB devices over Remote Desktop to Terminal Server running on Windows Server 2003, 2008 or 2008R2.

It is very much similar to USB Redirector RDP Edition, except that this product provides some advanced features for Terminal Server users.

• Redirection of USB devices to Terminal Server over RDP protocol.
• Isolation of USB devices in user's session (HID and Mass Storage only).
• Safe Removal icon for USB Mass Storage devices in Remote Desktop session for non-admin users.
• For more information see Product Comparison Table.

USB Redirector RDP Edition v2.0 has been released.

• Added support of new USB device types
• Device reset on disconnect

• A number of minor bugs fixed
• Fixed safe removal issue on USB client side in Windows 7
• Fixed issue with device sharing during system boot on Workstation
• Fixed issue with ActiveSync not detecting PDAs in Windows 7
• Fixed issue with Blackberry not detected in Windows 7
• Fixed Code 10 error in Device Manager for some devices on USB client

USB Redirector for Linux v 2.1 has been released.

• Support for kernel versions up to 2.6.35

• USB Server, USB Client: a number of minor bugs fixed
• USB Client: fixed USB Flash hanging on machines with more than 1G of memory
• USB Server: fixed unexpected disconnections on some devices

USB Server for Linux v 1.9.6 has been released.

• Now USB server is compatible with 2.6.27 kernel version and later;

• USB device disconnect during reset on 2.6.27 ang higher kernels;
• Workaround for kernel memory leak in kernels 2.6.25 through 2.6.28.8 during ISOH transfers on EHCI controllers.

USB Redirector v 4.5 and USB Redirector RDP Edition v 1.5 has been released.

New Devices:

• Dino USB microscope.

• Issue with safely removal USB devices into auto-connection mode is fixed;
• Issue on server side with high-speed USB video devices is fixed;
• Issue on client side while connecting USB device with the same serial number is fixed;
• Issue on client side while connecting USB device with same DeviceId but with different Revision is fixed;
• Compatibility of 32-bit and 64-bit platforms is improved;
• Issue with hibernate mode is fixed.

• Added new commands to the command-line utility;
• Virtual USB devices now act as real devices when safely removed or enabled/disabled;
• Support of audio and video USB devices on Windows Vista/2008 Server is improved;
• Network delays were considerably reduced. This allows to use audio and video USB devices over Wi-Fi!

USB Server for Linux v1.9.5 has been released.

• Now USB server is compatible with 2.6.26 kernel version and later;
• Network delays were considerably reduced. This allows to use audio and video USB devices over Wi-Fi!

• Dino USB microscope.

• Issue with Logitech STX web cam is fixed.

USB Redirector v 4.4 and USB Redirector RDP Edition v 1.4 have been released.

• iPhone is suppotred now.

USB Server for Linux v 1.9.1 has been released.

• Improved support of devices that upload firmware when they are plugged.

• iPhone is suppotred now.

• Auto-sharing extermal USB hubs.

USB Redirector v 4.3.3 and USB Redirector RDP Edition v 1.3.3 has been released.

• Improved support of devices that upload firmware when they are plugged.

• Adding USB devices to the Exclusion list;
• Windows x64 usb-redirector main module crash.

USB Server for Linux v 1.9 has been released.

• Auto-sharing mode;
• Exlusion list;
• New comand line format;
• NSLU2 as USB Serevr is supported;
• x64, arm, xscale, mips platfoms are supported.

USB Redirector v 4.3 and USB Redirector RDP Edition v 1.3 has been released.

Features:

• Remote Control allows connecting/disconnecting USB devices and creating callback connection to the remote client from your PC that acts as a Server...

• Connection to Windows 2008 Server;
• Linux USB Server compatible some errors.

USB Server for Linux v 1.8 has been released.

• Fix some memory leaks;
• Appearing duplicate of USB devices in comman line shell.

• Prolific USB-to-Serial Comm Port;
• Logitech Communicator STX webcam;
• Microsoft NX-6000 web cam.

USB Redirector v 4.2 and USB Redirector RDP Edition v 1.2 has been released.

• Command line utilites is added.

• Problem while connecting usb device over callback connection was resolved.

• BlackBerry smart phone is supported

USB Server for Linux v 1.7.1 has been released.

• USB Server is compatible with rdesktop.

USB Redirector v 4.1 and USB Redirector RDP Edition v 1.1 has been released.

• Connecting USB devices to selected client from USB Server;
• Auto connect USB devices before logon on Terminal Server.

• Clients connected from the same IP are now correctly shown;
• USB devices are correctly shown in the main window while scrolling.

• Logitech Communicator STX webcam;
• U3 Cruzer Micro disk on key.

USB Server for Linux v 1.7 has been released.

• Problem with connecting External USB HDD was resolved.

USB Redirector RDP Edition v 1.0 has been released. Now Terminal server users can easily redirect their USB devices (plugged locally) to the Terminal Server.

New Features:

• Now USB Redirector uses RDP virtual channels instead of TCP/IP;
• Microsoft Terminal Services Client version 5.x / 6.x are supported.

USB Redirector v 4.0 has been released.

New Features:

• Now USB Redirector distinguishes USB port and USB hub where device is plugged;
• Now USB Redirector determines USB device's class, subclass and protocol;
• Now it is possible to share a USB device manually without installation of drivers and replug;
• Hibernate and sleep modes are supported;
• The data throughput is increased up to 2 times for high-speed devices;
• Linux connectivity has been added into Lite client.

• Bug with some non-working HID devices has been fixed.

USB Server for Linux v 1.6 has been released.

• Microsoft Live Web Cam has been supported.